Crystaplex® Ice Dam
CHANGEOVERS MADE EASY
The Crystaplex® Ice Dam, integral in the use of the CheckFlex@ system, is a permanent base on top of which the dasher boards are anchored for the purpose of retaining the ice after the boards are removed for other activities.
Crystaplex® 508 Ice Dam
2.0” height. Available in either galvanized steel u-channel or fabricated stainless steel.
Crystaplex® 635 Ice Dam
2.5” height. Available in either fabricated galvanized steel or fabricated stainless steel.
Steel Ice Dam
Steel/ Powder Coated Steel Ice Dam
With features and benefits like these, it’s no wonder the Crystaplex® ice dam is fast becoming the ice dam of choice for multi-purpose arenas:
- Strong stainless steel construction is resistant to ice build up or pressure
- Uniformity and strength means puck rebound is consistent
- Accommodates 5/8” or 1/2” tempered glass
- Replaceable HDPE kick plate uses nylon fasteners to attach to the ice dam
- Double set of integrated dasher anchors provide 100% backup should an anchor become stripped or unusable
- Insulated to minimize frost buildup or edge thawing
- Dasher anchors are easily repaired or replaced
- Designed for installation on new rinks or retrofitted on existing
- Laser measurements add to dimensional accuracy and higher quality
- Stainless steel offers superior corrosion performance and higher ice quality
Poly Ice Dam
Popular for years in multi-purpose arenas, this natural white high density polyethylene dam has features not found in other ice dams:
- Cost-effective
- Light weight and easy to install
- A good insulator
- Suitable for skate traffic
Commonly used in 7” widths to match dasher board panel widths and available in several thicknesses. In addition to the dasher anchors, the poly ice dam requires an additional 3 anchors per 8 feet. Available in 1“ or 2” thickness.
Poly Ice Dam
Poly Ramps
Durable and maintenance-free tapered poly ramps are custom machined from natural white HDPE. We offer ramps in 1″, 1.5″, 2″, and 2.5″ heights that taper down to 1/4”. Available in straight or radius sections up to 10’ in length.
Standard straight sizes:
1” x 23” x 108”
1-1/2” x 23” x 108”
Standard radius sizes:
1” x 23” x 108”
1-1/2” x 23” x 108”
Poly Ramp
Flush Mount Kick Plate
Introduced in 2002, the Flush Mount Kick Plate is an integral component in the Crystaplex® Conversion Arena System for multi-purpose arenas. The 8″ high inlaid kick plate, fabricated from high-density virgin polyethylene, provides a uniform board facing thereby ensuring consistent puck rebound.
NHL and the NHL Shield are registered trademarks and the NHL Preferred Rink Equipment Supplier logo is a trademark of the National Hockey League. © NHL. All Rights Reserved.
